DETROIT SERIES 50 Injector, Controls Electronic #274
Category: Fuel System
Description
Callout | Part Number | Description |
R6136806 | MODULE, W/SHIFTED CRYSTAL (REMANUFACTURED) | |
1 | R7570049 | ECM DDEC II – 6 CYLINDER |
R16171618 | REMANUFACTURED 16171618 | |
R6171618 | EPROM STABILIZER KIT | |
5 | 11504603 | SCREW, M8X1.00X25.0 MM |
7 | 11504972 | BOLT, M6 X 1.00 X 30 MM |
6 | 23502860 | PLATE (DDEC II) |
10 | 23503565 | PLATE, RETAINER |
9 | 23504640 | FITTING, BLOCK END PLATE |
8 | 23504641 | SEAL, FUEL FITTING BLOCK |
3 | 23512307 | ISOLATOR, ECM MOUNT |
4 | 23512309 | BOLT M8 1.25 SHOULDER 12 PT HD |
2 | 23513588 | STUD/SPCR M8 X 1.25 SPCR LG 55.0 |
12040945 | SEAL, CONNECTOR (5-PIN HARNESS) | |
12059226 | SEAL, CONNECTOR (6-PIN HARNESS) | |
23532797 | SENSOR OIL PRESS W/DUAL GASKET SEAL & VENT FILTER | |
11504986 | BOLT, M8 X 1.25 X 14 MM | |
08929387 | SENSOR ASSY. (SRS) | |
11504986 | BOLT, M8 X 1.25 X 14 MM | |
08929388 | SENSOR ASSY. (TRS) | |
23509161 | BOLT, M10 X 1.5 X 20.0 FLG HEADED S | |
23518092 | SENSOR ASSY., OIL WATER FUEL & AIR TEMPERATURE | |
11509511 | BOLT, M8 X 1.25 X 20 MM | |
12114458 | HARNESS ASM INJ 6 OR 8 CYL ECM | |
05101020 | STRAP, NYLON (2.5255) | |
08929534 | CLIP | |
08929508 | COVER | |
11503454 | BOLT, M10 X 1.5 X 20.0 | |
11504986 | BOLT, M8 X 1.25 X 14 MM | |
12114336 | HARNESS, ENG SENSOR | |
R23515668 | PRO DRIVER PETERBILT FLUSH MT | |
R23515671 | PRO DRIVER VOLVO FLUSH MT | |
R23515672 | PRO DRIVER FORD FLUSH MT | |
R23516428 | PRO DRIVER KENWORTH SURFACE MT | |
23515649 | PRO DRIVER DETROIT DIESEL SURFACE MT | |
23525753 | KIT PRO/DRIVER DC OEM FLUSH DDC |
Be the first to review “DETROIT SERIES 50 Injector, Controls Electronic #274” Cancel reply
Reviews
There are no reviews yet.