Description
| Callout | Part Number | Description |
| 4 | R23513553 | MODULE, REMANUFACTURED W/PROM |
| SERVICEABLE PART R3513553 CAN BE REPLACED BY R3518645, R3516923 OR R3518743WHEN R3513553 IS NOT AVAILABLE. | ||
| 6 | 23514772 | LABEL DDC ELECTRONIC CONT |
| R16171618 | REMANUFACTURED 16171618 | |
| R6171618 | EPROM STABILIZER KIT | |
| 2 | 23512307 | ISOLATOR, ECM MOUNT |
| 1 | 23512309 | BOLT M8 1.25 SHOULDER 12 PT HD |
| 5 | 23515341 | STUD/SPCR M8X1.25 SPCR LG 25.0 ECM |
| 3 | 23516835 | STUD/SPCR M8X1.25 SPCR LG 80.0 ECM |
| 7 | 11504603 | SCREW, M8X1.00X25.0 MM |
| 8 | 23517270 | SHIELD ASSY., ECM HEAT (DDEC III) |
| 12040945 | SEAL, CONNECTOR (5-PIN HARNESS) | |
| 12059226 | SEAL, CONNECTOR (6-PIN HARNESS) | |
| 23532797 | SENSOR OIL PRESS W/DUAL GASKET SEAL & VENT FILTER | |
| 11504986 | BOLT, M8 X 1.25 X 14 MM | |
| 08929387 | SENSOR ASSY. (SRS) | |
| 11504986 | BOLT, M8 X 1.25 X 14 MM | |
| 08929388 | SENSOR ASSY. (TRS) | |
| 23509161 | BOLT, M10 X 1.5 X 20.0 FLG HEADED S | |
| 23514708 | SENSOR ASM COOL TEMP DDEC III | |
| 23515251 | SENSOR ASSY., COOL TEMP 3/4 IN. BRS | |
| 23518092 | SENSOR ASSY., OIL WATER FUEL & AIR TEMPERATURE | |
| 11509511 | BOLT, M8 X 1.25 X 20 MM | |
| 23514223 | HARNESS INJ ECM DDEC III USES 12034222 TERMINALS | |
| 23514225 | HARNESS ENG SENSOR | |
| 05101020 | STRAP, NYLON (2.5255) | |
| 08929534 | CLIP | |
| 08929508 | COVER | |
| 11503454 | BOLT, M10 X 1.5 X 20.0 | |
| 11504986 | BOLT, M8 X 1.25 X 14 MM | |
| R23515668 | PRO DRIVER PETERBILT FLUSH MT | |
| R23515671 | PRO DRIVER VOLVO FLUSH MT | |
| R23515672 | PRO DRIVER FORD FLUSH MT | |
| R23516428 | PRO DRIVER KENWORTH SURFACE MT | |
| 23515649 | PRO DRIVER DETROIT DIESEL SURFACE MT | |
| 23525753 | KIT PRO/DRIVER DC OEM FLUSH DDC | |
Reviews
There are no reviews yet.